Concept Pro VXH960-16 User Manual Download Page 51

Page: 51 / 124

Storage

System

Settings

Disk Operations

You can set the disk’s write mode, recording time limit and format the HDD.

From <SYSTEM SETUP> - <STORAGE>, select <DISK OPERATIONS>.

Use the [

pqtu

/ENTER] buttons on the remote control or use the

mouse to set the operation conditions of the disk.

DISK WRITE MODE

- If it is set to <OVERWRITE>, the existing data will be

overwritten by the new recording data, once the HDD

becomes full.

- If the option is set to <ONCE> and the HDD isfull, the DVR

will stop recording and output the beep or alarm that is

pre-defi ned at <EVENT>.

RECORDING TIME LIMIT: The recording data will be deleted

after a maximum specifi c time. If it is set to <OFF>,

this function will be disabled.

Record Time Limit: 1 day even if there is suﬃ cient free space

in the HDD, it records / keeps videos of the most recent 1 day

only.

DISK FORMAT: format the hard disk.

Note that formatting the HDD will delete all video data and logs.

To apply the change, click <APPLY> at the bottom of the screen.

When done, press the [EXIT] button on the remote control or click

<CLOSE> in the lower screen. The confi rmation message appears and

you will return to the previous menu.

Summary of Contents for VXH960-16





























































































































Search results

Summary of Contents for VXH960-16

Reviews:

Related manuals for VXH960-16

Brands by name

Popular brands

Concept Pro VXH960-16, User Manual

Search results

Summary of Contents for VXH960-16

Reviews:

Related manuals for VXH960-16

Brands by name

Popular brands