Concept Pro VXH960-16, User Manual

Page: 110 / 124

107
Setting-up port forwarding
This section assumes that you have already established a successful connection locally. Log-on to the DG834 and select ‘Services’ from the
menu.
Click ‘Add Custom Service’ and enter the following values:
Name: VXH960 (or any other name of your choice)
Type: TCP
Start Port: 6200
Finish port: 6200
And click ‘Apply’
Then, create a fi rewall rule as follows:
Select ‘Firewall Rules’ from the menu. Under the inbound services, click ‘Add’ and enter the following:
Service: VXH960 (TCP:6200) – This is the service you created earlier.
Action: Leave at ‘ALLOW always’.
Send to LAN server: 192.168.0.3 - This is the IP address of the VXH960.
Wan Users and Log settings can be left unchanged.
And click ‘apply’ to add the new rule.
Repeat this process for the RTSP Port (5554)
Once the fi rewall rules are set-up, anybody should be able to access the VXH960 from the outside world, as long as they are using the
correct software and correct log in details.
To confi gure the software, the IP address is the public static IP address of your router and the port number in this case will be 6200. The
username and password must match those set-up on the VXH960.
Setting up multiple VXH960s on one router
The setup steps in this case are identical but you will need to create a separate service and fi rewall rule for each VXH960 connected. Note
also that each VXH960 must have a unique port setting as well as a unique IP address.
Example – 2 VXH960s connected to a router
1st VXH960 settings
IP address: 192.168.0.3
Port: 6200
RTSP: 5554
Gateway: 192.168.0.1
On the DG834, confi gure a service on port 6200 and a fi rewall rule to direct this service to 192.168.0.3
2nd VXH960 settings:
IP address: 192.168.0.4
Port: 6201
RTSP: 5555
Gateway: 192.168.0.1
Configuring a Netgear DG384 router
Appendix C