Comtech EF Data Vipersat SLM-5650A, Installation And Operation Manual

Page: 391 / 516

SLM-5650A Satellite Modem
Revision 10
Appendix E E–69 MN-SLM-5650A
If a parameter is rejected for any reason, an error will appear at the top of the page, along with an
explanation that serves to assist the user in the re-entry of information, as shown in this example:
Save
Any changes made via the CLI should be saved to permanent storage prior to terminating the CLI
session. Although changes are retained after a CLI session ends (as long as the SLM-5650A
remains running), take note also that changes will be lost if, for example, the modem is rebooted or
the NP Interface is reset or loses power. Modified parameters can be saved by issuing the Save
command “S” from any menu. You are prompted to confirm that all changes should be made
permanent:
Logout
When you attempt to terminate a CLI session via Logout command “L”, the CLI prompts you to
confirm that you wish to end your session: