Comtech EF Data Vipersat SLM-5650A, Installation And Operation Manual

Page: 170 / 516

SLM-5650A Satellite Modem
Revision 10
Ethernet Interface Operation 8–12 MN-SLM-5650A
Do these steps:
1. Make sure to define the Connect To Telnet connection properties correctly ( File

Properties ) ( Figure 8-4 , left):
a. Enter the SLM-5650A’s Traffic/Management IP Address as the “Host address”
(e.g., 192.168.1.1).
b. Enter TCP Port 23 as the “Port number”.
c. Set “Connect using” to TCP/IP (Winsock) instead of COM1 or COM2.
d. Click [OK] to save your settings.
2. For ASCII Setup ( File

Properties

Settings

ASCII Setup ) ( Figure 8-4 , right):
a. Check the “Send line ends with line feeds” option in the ‘ASCII Sending’ section.
b. Check the “Append line feeds to incoming line ends” option in the ‘ASCII
Receiving’ section.
c. Click [OK] to save your settings.