Comtech EF Data Vipersat SLM-5650A, Installation And Operation Manual

Page: 251 / 516

SLM-5650A Satellite Modem
Revision 10
Serial Remote Control 10–57 MN-SLM-5650A
Parameter
Type
Controller-to-Target
Instruction Code and
Qualifier
Arguments
for Command
or Query
Description of Arguments
(Note that all arguments are ASCII numeric codes from 48 to 57)
Target-to-Controller
Command Query
Response to
Command
Response to Query
(see Description of
Arguments)
Remote Modem
AUPC Enable
RPC= RPC? 1 byte Command or Query.
Sets or returns Remote Modem AUPC Control in the form x, where:
0 = Off
1 = On
Example: <0001/RPC=1{CR} (Turns on remote modem AUPC
Control)
RPC=
RPC?
RPC*
RPC#
RPC=x
Remote Modem
BERT BER
N/A RPE? 6 bytes Query only.
Returns the value of the remote modem’s BERT BER in the form
a.bEcc where:
a.b = BER value
Ecc = Exponent
Note: Returns 0.0E00 if the BERT is not synchronized to a pattern.
Example: <0001/RPE=4.0E06{CR} (Reports BER as 4.0 x 10
-6
)
N/A RPE=a.bEcc
Remote Modem
I/O Loopback
RPL= RPL? 1 byte Command or Query.
Sets or returns Remote Modem I/O Loopback Mode in the form x,
where:
0 = Off
1 = On
Example: <0001/RPL=1{CR} (Turns on remote modem AUPC
Control)
RPL=
RPL?
RPL*
RPL#
RPL=x