Comtech EF Data Vipersat SLM-5650A, Installation And Operation Manual

Page: 101 / 516

SLM-5650A Satellite Modem
Revision 10
Firmware Update 5–21 MN-SLM-5650A
b. To log in to the secure interface, select Crypto Officer from the navigation list that is
provided in the upper left-hand corner of each page, then click [Go!].
c. When prompted, enter the User Name and Password at the Login page:
• Factory Default User Name is comtech
•
Factory Default Password is comtech
7 Update the TRANSEC Module bulk firmware:
a. Open the Admin | Update Firmware page.
b. In the Bulk Firmware Upload section of the page, locate the update file downloaded
earlier to the User PC temporary folder:
•
Click [Browse]. The Choose File dialog box will open
•
Locate the folder created for the file download; double-click on the folder name
to open the folder.
c. Select the update file, and then click [Open]. The filename should appear in the Upgrade
Bulk File text box.
d. Click [Upload] to begin the Firmware Application Process.
8 Wait while the file transfers.
a. After [Upload] is clicked, the Firmware Application Process page appears while the
TRANSEC Module transfers, then uploads, the update file from the User PC.
b. Allow sufficient time for the file to be uploaded – approximately five minutes is required
for the process to be completed. During the upload process, the page displays a transfer
progress bar that provides the scrolling percentage of completion. During transfer, the
message Please Wait… displays: