Comtech EF Data Vipersat SLM-5650A, Installation And Operation Manual

Page: 451 / 516

SLM-5650A Satellite Modem
Revision 10
Appendix F F–27 MN-SLM-5650A
F.5.2 CLI Menu System – Parallel Functionality
Chapter 7. FRONT PANEL OPERATION
The CLI, accessible via SSH, allows you to change operating parameters in a manner similar to
the functionality as provided for the monitoring, configuration, and control via the SLM-5650A
Satellite Modem’s front panel menus (see
Chapter 7. FRONT PANEL OPERATION ) and in the
TRANSEC Module HTTPS Interface (see Section F.2 in this appendix).
F.5.2.1 CLI Menu – Common Information, Navigation, Operation Features
With some exceptions, the menu pages depicted in this appendix feature the following common
informational or navigational aids:
Menu Options/Fields Entry Description
[Text field example] [RO]
Typically found in the body of the page. This designates the field as a read-
only status/informational message. There is no user action required for this
item.
Logout of CLI Session L
Found at the bottom of the screen.
Allows user to log out of the CLI session.
Exit Menu X
Found at the bottom of the screen.
Allows user to exit the current menu and return to the parent menu.
Alternately, you may press the Esc key to perform the same action.
Typically, once any mnemonic is entered, you are prompted to type in
a functional selection, an alphanumeric configuration string, or an
operational value. This prompt is provided at the bottom of the active
page and takes the form of a selection choice and/or a blank prompt
(a solid bar), as shown in the example to the right:
If a parameter is rejected for any reason, an error will appear at the top of the page, along with an
explanation that serves to assist you in the re-entry of information, as shown in these examples: