Comtech EF Data Vipersat SLM-5650A, Installation And Operation Manual

Page: 238 / 516

SLM-5650A Satellite Modem
Revision 10
Serial Remote Control 10–44 MN-SLM-5650A
Parameter
Type
Controller-to-Target
Instruction Code and
Qualifier
Arguments
for Command
or Query
Description of Arguments
(Note that all arguments are ASCII numeric codes from 48 to 57)
Target-to-Controller
Command Query
Response to
Command
Response to Query
(see Description of
Arguments)
Retrieve next 5
unread Stored
Events
N/A RNE? 110 bytes Query only.
Returns the oldest five Stored Events that have not yet been read
over the remote interface in the form {CR}Sub-body{CR}Sub-
body{CR}Sub-body{CR}Sub-body{CR}Sub-body, where:
Sub-body = Axxxxxxxxddmmyyhhmmss:
A = fault type, where:
1=Unit
2=Rx Traffic
3=Tx Traffic
4=Info
xxxxxxxx = Fault Code number, as in LUF?, TXF?, RXF?, or Info
Code. Specifically:
00000000 = Power Off
00000001 = Power On
00000002 = Log Cleared
00000004 = Global Config Change
00000005 = NP Module Watch Dog Timer
00000006 = NP Module Boot Timeout
00000007 = TRANSEC Module Boot Timeout
ddmmyyhh = date in day/month/year format
hhmmss = time in hours/minutes/seconds format
Note: If there are less than 5 events to be retrieved, the remaining
positions are padded with zeros. If there are no new events, the
response is RNE*.
N/A RNE={CR}Axxxxxxxxd
dmmyyhhmmss{CR}A
xxxxxxxxddmmyyhhm
mss{CR}Axxxxxxxxdd
mmyyhhmmss{CR}Ax
xxxxxxxddmmyyhhmm
ss{CR}Axxxxxxxxddm
myyhhmmss