Comtech EF Data Vipersat SLM-5650A, Installation And Operation Manual

Page: 154 / 516

SLM-5650A Satellite Modem
Revision 10
Front Panel Operation 7–48 MN-SLM-5650A
(UTIL:) Firmware

Information

Bootrom
Bootrom: 10/18/07
FW-0000029- 1.1.1
This screen displays the Bootrom release date, the Firmware number and the revision
number. Press
[ENT] or [CLR] to return to the previous menu.
(UTIL:) Firmware

Information

Image#X
Image#X: Bulk App M&C Mod Demod Decoder
Filters TxIntfc RxIntfc Turbo (

E)
Where Image #X denotes selection of Image#1 or Image#2 :
This information may differ for each firmware image load. Both Image screens display
similar information – the loaded image’s firmware number with revision letter (shown as ‘x’);
the firmware version’s release date (shown as MM/DD/YY); and the firmware version
number (shown as #.#.#):
Image#X Item Example
Bulk
(The bulk is the sum of all the individual pieces)
FW-0000030x, MM/DD/YY, #.#.#
App FW-0000031x, MM/DD/YY, #.#.#
M&C FW-0000032x, MM/DD/YY, #.#.#
Mod FW-0000033x, MM/DD/YY, #.#.#
Demod FW-0000034x, MM/DD/YY, #.#.#
Decoder FW-0000038x, MM/DD/YY, #.#.#
Filters FW-0000034x, MM/DD/YY, #.#.#
TxIntfc FW-0000040x, MM/DD/YY, #.#.#
RxIntfc FW-0000041x, MM/DD/YY, #.#.#
Turbo FW-0000042x, MM/DD/YY, #.#.#
Opt
This number varies depending on the installed optional interface (NP, GBEI, etc.):
FW-#######x, MM/DD/YY, #.#.#
(UTIL:) Firmware

Select
Current Active Image#2
Next Reboot Image#1 #2 (

E)
This menu sets which Firmware Image loads upon bootup. Use the

arrow keys to
select the Next Reboot Image as #1 or #2 . Press [ENT] .
To reboot the modem with the selected Next Reboot Image, cycle
the power.