Comtech EF Data Vipersat SLM-5650A, Installation And Operation Manual

Page: 334 / 516

SLM-5650A Satellite Modem
Revision 10
Appendix E E–12 MN-SLM-5650A
E.7.2 User Login
Access to the SLM-5650A’s NP HTTP/HTTPS Interface depends on the IP Interface Security Mode
setting selected for the interface (via the Admin | Security page – see
Section E.7.5.2.3 for more
information).
From any compatible Web browser, enter the NP Interface IP Address into the browser’s Address
area as follows (where “xxx.xxx.xxx.xxx” represents the IP Address of the NP Interface).
For a non-secure HTTP session (Low Level Security selected):
http:// xxx.xxx.xxx.xxx;
For a secure HTTPS session (High Level Security selected):
https:// xxx.xxx.xxx.xxx.
When prompted, type in a valid User Name and Password, similar to the dialog box shown to the
right. The default for both is
comtech . Click [OK] to continue.
The NP Interface User Name and Password are each restricted to a minimum of
7 characters and a maximum of 25 characters, excluding < (ASCII Code 60), >
(ASCII Code 62), “ (ASCII Code 34), and ~ (ASCII Code 126).