CDM-625 Advanced Satellite Modem
Revision 1
Front Panel Operation
MN-0000036 (Ref MN/CDM625.IOM)
Cold-Start
If enabled, when the CSAT is powered on, the IF and RF outputs will remain
muted for 15 minutes.
AFR
(Auto Fault Recovery)
This defines how a CSAT will react to momentary
fault conditions:
Off: CSAT will mute when faulted and remain muted.
On: CSAT will mute when faulted, but unmute after the fault goes away.
Xref
(External Reference)
The CSAT will automatically lock to an external 5 or
10 MHz reference independent of the state of this selection. This selection
determines whether or not the Summary Fault Relay is activated if the CSAT
loses lock with the external reference.
Ref-Adjust
The user may edit the Internal 10MHz Reference setting. The value will
scroll between 000 and 255.
NOTE:
The Internal Reference is adjusted in the factory to be very accurate
with the default setting of 087. This parameter is made available to
compensate for the long-term frequency drift of the oscillator.
Sync Clock
(Default is
NO
.) Selecting
YES
and pressing
ENTER
will cause the CSAT
RTC to be synchronized to the Modem RTC.
5.10.7.2
ODU: FSK-control
Æ
(2 CSATs)
Æ
CSAT
Æ
Monitor
Monitor:
Tx Rx Misc Power-Supplies
(
34
)
Use the
◄
►
arrow keys to select the parameters to monitor, then press
ENTER
.
ODU: FSK-control
Æ
(2 CSATs)
Æ
CSAT
Æ
Monitor
Æ
Tx
Tx: SynTune = 09.6 VDC Power = <24 dBm
IFLO = 11.1 VDC Temp = 26 C
Press
ENTER
or
CLEAR
to return to previous menu.
ODU: FSK-control
Æ
(2 CSATs)
Æ
CSAT
Æ
Monitor
Æ
Rx
Rx: SynTuneE = 01.4 VDC
IFLO = 11.2 VDC Temp = 26 C
Press
ENTER
or
CLEAR
to return to previous menu.
ODU: FSK-control
Æ
(2 CSATs)
Æ
CSAT
Æ
Monitor
Æ
Misc
Misc: Ref-Tune = 03.0 VDC
LNA = 00.05 mA Fan = 550 mA
Press
ENTER
or
CLEAR
to return to previous menu.
5–67
