Comtech EF Data CDM-625, Installation And Operation Manual

Page: 314 / 322

CDM-625 Advanced Satellite Modem Revision 1
Remote Control MN-0000036 (Ref MN/CDM625.IOM)
D.7.7 BUC Commands (L-Band Device)
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response
to
Command
Query
(Instruction &
Qualifier)
Response to Query
BUC
Power Supply
enable BPS=
Exception
600L emulation:
ODP= 1 byte, value
of 0 or 1 Command or Query.
Power Supply control:
0=Disable the BUC DC Power Supply
1=Enable the BUC DC Power Supply
BPS=
BPS?
BPS*
BPS# BPS?
Exception
600L emulation:
ODP? BPS=x
(see description of
arguments)
BUC
10 MHz
Reference BFR=
Exception
600L emulation:
ODR=
1 byte Command or Query.
Where x is either 0(OFF) or 1(ON).
BFR=
BFR?
BFR*
BFR# BFR?
Exception
600L emulation:
ODR? BFR=x
(see description of
arguments)
BUC
Current
Low Limit BCL=
Exception
600L emulation:
ODL= 4 bytes Command or Query.
BUC Current Low Limit, a value between 0 and 4000mA, in
100mA increments. BCL=
BCL?
BCL*
BCL# BCL?
Exception
600L emulation:
ODL? BCL=xxxx
(see description of
arguments)
BUC
Current
High Limit BCH=
Exception
600L emulation:
ODH= 4 bytes Command or Query.
BUC Current High Limit, a value between 0 and 4000mA, in
100mA increments. BCH=
BCH?
BCH*
BCH# BCH?
Exception
600L emulation:
ODH? BCH=xxxx
(see description of
arguments)
BUC
Address BAD=
Exception
600L emulation:
OAD= 1 byte, value
of 1 to 15 Command or Query.
BUC Address, in the form: xx, where xx is between 1 and 15.
Note: This command is only valid when the FSK and BUC power
are enabled.
BAD=
BAD?
BAD*
BAD# BAD?
Exception
600L emulation:
OAD? BAD=xx
(see description of
arguments)
BUC
Output Power
Enable BOE=
Exception
600L emulation:
OOP= 1 byte, value
of 0 or 1 Command or Query.
BUC Tx Carrier Output Power Enable, either 0(OFF) or 1(ON).
Note: This command is only valid when the FSK and BUC power
are enabled.
BOE=
BOE?
BOE*
BOE# BOE?
Exception
600L emulation:
OOP? BOE=x
(see description of
arguments)
D–54