CDM-625 Advanced Satellite Modem
Revision 1
Ethernet Management
MN-0000036 (Ref MN/CDM625.IOM)
6.5.4.3.7
Config | LNB (Low Noise Block Down Converter)
Figure 6-12. Config | LNB page
The ‘
Config | LNB
’ page (
Figure 6-12
) is used to configure Low Noise Block Down Converter
parameters, and display the LNB status for L-Band operation.
LNB Control
•
LNB DC Power
and
LNB Reference Enable
may be turned
ON
or
OFF
.
•
The user may assign
LNB Low
and
High Current Threshold
values ranging from 0 to
500 mA.
•
The user may assign the
Rx Lockout Frequency
and designate the value as a
HIGH (+)
or
LOW (-)
limit.
LNB Status
The parameters shown here are
read-only
and cannot be changed.
Once the desired configuration settings have been made on this page, the user should then click
[Submit LNB Controls]
as needed to save those changes.
6–20
