CDM-625 Advanced Satellite Modem
Revision 1
Introduction
MN-0000036 (Ref MN/CDM625.IOM)
1.7.8
Miscellaneous
Front Panel
Tactile keypad, 6 keys (Up/Down), Left/Right, Enter/Clear)
Vacuum Fluorescent Display (blue) – 2 lines of 40 characters
Loopbacks
Internal IF loopback, RF loopback, digital loopback, and inward/outward loopback
Fault relays
Hardware fault, Rx and Tx Traffic Alarms, Open Network Backward Alarms
Type: Form C Contacts. Rating: Up to +/-50 volts, max 0.5 Amp
M&C Interface
EIA-232 and EIA-485 (addressable multidrop, 2-wire or 4-wire) or Ethernet (10/100
BaseT)
M&C Software
Serial comms, SNMP, Telenet, Web Server (http)
Firmware update
Via Ethernet port. ftp protocol
Dimensions
1RU high, 17.65 inches (448 mm) deep
Weight
10.5 lbs (4.8 kgs) max (All option cards and 48V BUC supply installed)
AC consumption
48 watts (typical, TPC/LDPC Codec and CnC module installed), 55 watts (maximum)
280 watts (typical TPC/LDPC Codec, CnC module and 48 volt BUC supply installed,
300 watts (max)
AC operating voltage
100 - 240 volts AC. +6%/-10% - autosensing
(total absolute max. range is 90 - 254 volts AC)
DC consumption
(option)
As above (AC consumption)
DC operating voltage
48 volts nominal
(total range is 36 - 60 volts)
Operating temperature
0 to 50ºC (32 to 122ºF)
1.7.9
Approvals
“CE” as follows:
EN 55022 Class B
(Emissions)
EN 50082-1 (Immunity)
EN 60950 (Safety)
EN 61000-3-2
EN 61000-3-3
EN 61000-4-2
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-8
EN 61000-4-9
EN 61000-4-11
EN 61000-4-13
FCC
FCC Part 15 Class B
1–21
