CDM-625 Advanced Satellite Modem
Revision 1
Ethernet Management
MN-0000036 (Ref MN/CDM625.IOM)
6.5.4.3.5
Config | D&I (Drop and Insert)
Figure 6-10. Config | D&I page
The appearance of the ‘
Config | D&I
’ page (
Figure 6-10)
is dependent on the framing mode
selected on the ‘
Config | Modem’
page (Sect. 6.5.4.3.2). Contents will vary accordingly:
•
If the selected framing mode is D&I++, the heading will read “
D&I++Parameters
” and
the available parameters will adjust accordingly.
•
If the selected framing mode is Quad Drop & Insert, the heading will read “
Quad Drop
& Insert Parameters
” and the available parameters will adjust accordingly.
For details pertaining to the configuration parameters available on this page, refer to
Chapter 5.
FRONT PANEL OPERATION
. For more information about D&I functionality, refer to
Chapter 9. CLOCK MODES AND DROP AND INSERT (D&I)
.
Once the desired configuration settings have been made on this page, the user should then click
[Submit]
as needed to save those changes.
6–18