CDM-625 Advanced Satellite Modem
Revision 1
Ethernet Management
MN-0000036 (Ref MN/CDM625.IOM)
6–14
6.5.4.3.2
Config | Modem
page (
Figure 6-7
) is used to configure modem operating (Tx / Rx)
param
•
Carrier-in-Carrier (CnC) Parameters.
Figure 6-7. Config | Modem page
The ‘
Config | Modem’
eters including:
•
Tx / Rx Interfaces and Framing
IMPORTANT
other
parameters, and should be configured before setting other parameters.
ration parameters available on this page, refer to
Chapter 5.
RONT PANEL OPERATION
.
each section, the user should then click
[Submit]
as needed in that section to save those changes.
The Tx / Rx Interface Types and Framing Modes have higher priority than
For details pertaining to the configu
F
Once the desired configuration settings have been made in
