CDM-625 Advanced Satellite Modem
Revision 1
Remote Control
MN-0000036 (Ref MN/CDM625.IOM)
D.7.9 VLAN Configuration Strings
(NOT AVAILABLE IN THIS RELEASE)
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction &
Qualifier)
Response to Query
Switch VLAN
mode
SVM=
1 byte, value 0
or 1
Command or Query.
Switch VLAN mode, where x may be:
0=Normal, ie no VLAN support
1=VLAN mode
SVM=
SVM?
SVM*
SVM#
SVM? SVM=x
(see description of
arguments)
Switch VLAN
All
SVA= 4
(1-byte
arguments),
each may have
value of 1 or 2
Command or Query.
Format of the argument is WXYZ, where
W is the setting for port 1,
X is the setting for port 2,
Y is the setting for port 3, and
Z is the setting for port 4.
The value for
each
of these settings may be:
1=Filter all VLANs except those mentioned in VLAN table
2=Send out all packets as ‘tagged’, except those configured in
the VLAN table.
SVA=
SVA?
SVA*
SVA#
SVA?
SVA=WXYZ
(see description of
arguments)
Switch VLAN
configuration
SVC= 8
bytes,
alphanumeric
Command or Query.
Configure a VLAN table entry, using the format bbbbWXYZ,
where:
bbbb=VLAN ID, value 0002-4094.
W is the attribute for port 1,
X is the attribute for port 2,
Y is the attribute for port 3, and
Z is the attribute for port 4.
The permitted attributes for each of the ports is:
F – Filter
N – Native VLAN
T – Tagged packets out.
M – Member
(Programmer: Base software may save the VLAN table as VLAN
– 2 bytes and attribute – 1 Character.)
Note:
If PVID does not exist and room for a new entry is
available, it is added to the PVID entry table. If no room is
available in the table, response will be SVC* .
Issue SVC to change or update the port membership for a VLAN.
Use SVD to completely delete a VLAN entry from VLAN Table.
SVC=
SVC?
SVC*
SVC#
SVC?bbbb SVC=bbbbWXYZ
(see description of
arguments)
D–58