CDM-625 Advanced Satellite Modem
Revision 1
Remote Control
MN-0000036 (Ref MN/CDM625.IOM)
D.7.3 Unit Parameters
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction
& Qualifier)
Response to Query
Local/Remote
Status
LRS=
1 byte, 0 to 3
Command or Query.
Used set the user’s Local/Remote status, where:
0=Local
1=Serial Remote (RS-232/RS-485)
2=reserved
3=Ethernet Remote
Example:
LRS=1 (which is Serial Remote)
LRS
LRS?
LRS*
LRS#
LRS? LRS=x
(see description of
arguments)
Modem
Emulation
EMU=
1 byte, value
0,1 or 2
Command or Query.
The CDM-625 is designed to be a ‘drop-in’ replacement for the
CDM-600 or CDM-600L modems. In order for complete modem
emulation, all parameters, including the EID(equipment ID) must be
that of the modem it is emulating. This parameter permits the CDM-
625 modem to be configured that way.
The format for the argument is x, where x is:
0= full capability CDM-625 modem (default)
1= to emulate the CDM-600 modem
2= to emulate the CDM-600L modem
EMU=
EMU?
EMU*
EMU#
EMU? EMU=x
(see description of
arguments)
Front Panel
Lockout
FPL= 1
byte,
numeric
Command or Query.
Control the state of front-panel lockout, where:
0= no lockout
1= front panel lockout active.
Disable the lockout by either FPL=0, or by setting into local mode
using LRS=0.
FPL=
FPL?
FPL*
FPL#
FPL? FPL=x
(see description of
arguments)
Software
Image
IMG=
1 byte, value
of 1 or 2
Command or Query.
Active software image, where:
1=Bulk Image #1 currently active
2=Bulk Image #2 currently active
IMG=
IMG?
IMG*
IMG#
IMG? IMG=x
(see description of
arguments)
D–24