Compro Technology TN2200, User Manual

Page: 17 / 76

3-5 Change SD Memory Card Adjust the Lens
Chapter 3: Installtion
40°
90°
Figure 3-11. Pan adjustment
2. Tighten the pan adjustment screw and then, if necessary, go on to adjust the tilting position.
3. Loosen the tilt adjustment screw on both sides of the lens holder, as shown in below figure, and then
gently tilt the lens holder up or down to adjust the camera’s tilting position. The camera allows for 90 de-
grees of tilt adjustment.
40°
90°
Figure 3-12. Tilt adjustment
4. Having obtained the optimal result, tighten the tilt adjustment screws and re-attach the top cover to
complete the operation.
Change SD Memory Card
The camera comes with a 4GB microSD card pre-installed inside the housing. The SD memory card is user-up-
gradeable. The following explains how to change the SD memory card.
1. Power off the camera. Then loosen the fixing screws on the top cover with the supplied hex key and re-
move the top cover.
2. Locate the microSD card slot. Then push the pre-installed SD card gently to release it.