Compro Technology TN2200, User Manual

Page: 48 / 76

6-8 Event Setup Event Setup
Compro TN2200 - User’s Manual
RTP
If you want to broadcast video using RTP (Real-time Transport Protocol), you can set up the port range, video/
audio address and port number here.
QoS
QoS (Quality of Service) helps prioritize network traffic and reserve necessary bandwidth resource for criti-
cal applications. Here you can customize the packet priority for different types of packet data (video/audio
stream, event/alarm, web page) by specifying a different value for the DSCP (Differentiated Services Code
Point) field in their IP packets. The DSCP value that represents the top priority is 46. The default DSCP value is 0,
which indicates normal priority (meaning not using QoS).
The following is a table of the recommended DSCP values. The drop precedence indicates the order in which
IP packets shall be dropped when the network is congested. Packets of higher drop precedence will be
dropped first. Each class in the table is assigned a certain amount of network bandwidth.
Drop Precedence Class1 Class2 Class3 Class4
High drop precedence (3) 10 18 26 34
Medium drop precedence (2) 12 20 28 36
Low drop precedence (1) 14 22 30 38
Table 6-1. Recommended DSCP values
!
Important:
For the QoS function to work as it should, all the switches/routers in your
network environment must also support and enable QoS.
Event Setup
When an event happens, like detected motion, a snapshot can be instantly sent to your E-mail account, ftp
server, image server, notification server, HTTP server, or SMS server to warn you about what’s happened. In
order to properly set up the event function, you must:
1. First set up the event server based on your needs: E-mail, FTP, Image or ComproView® Notification.
2. Once the event servers are configured, you can then go to the trigger setup page to create an event trig-
ger and the event action(s) in response.
3. In the motion detection page, click and drag on the preview image to create a detection region and
then click [Save].
Event Server Setup
Here provides the configurations of 6 different event servers including E-mail, FTP, Image or ComproView®
Notify, HTTP, and SMS. Please click on the event server you want to configure and provide necessary informa-
tion.
Email server
Email server supports standard SMTP on SSL-protected webmail platforms such as Hotmail (Windows
Live) and Google Mail (Gmail). To use this function, go to [Event Server Setup] > [Email Event Server Set-
up], and enter the SMTP server address and port respectively. Then enter your user name and password,
and the E-mail subject as you like. As of August 2010, SMTP and SSL settings for Hotmail and Gmail are as
follows: