Compro Technology TN2200, User Manual

Page: 18 / 76

3-6 Install Camera from C4Home App Install Camera from C4Home App
Compro TN2200 - User’s Manual
Reset Button
Composite Video Output
microSD card slot
Figure 3-13. SD memory card slot
3. Pull the SD card out and insert a new one into the slot. Finally, re-install the top cover to complete the
upgrade.
Install Camera from C4Home App
Connect the Cables
This camera can only be powered using PoE (Power-over-Ethernet), which allows electrical power and IP
data to be both delivered on a single Ethernet cable. The following instructions explain ways to connect this
PoE-enabeld network camera and install it from C4Home app.
Using a PoE Switch
If the Ethernet ports on your network switch/router support PoE, connect your camera in the following way:
Midspan
(PoE Injector)
PoE Switch
(802.3af class3)
Wireless
Router/Hub
Wireless
Router/Hub
Internet
Internet
1. Ethernet cable from wireless router/hub to PoE switch/router: Connect the PoE switch/router with the
wireless router/hub that has been connected to your Cable/ADSL modem for internet connecting.
2. Ethernet port of the camera: Use the RJ-45 Ethernet cable (not supplied in the package) to connect the
Ethernet port of the network camera to the PoE port of your PoE switch/router.
3. Make sure your smartphone is able to go to internet via your wireless router.