Compro Technology TN2200, User Manual

Page: 35 / 76

4-9 Accessing via 3GPP Mobile Phone Accessing via M-JPEG Mode
Chapter 4: Accessing the Camera
Accessing via 3GPP Mobile Phone
You can access your IP camera via 3GPP-compatible mobile phones provided that the IP camera has a stable
Internet connection and the mobile device has a good connection to GPRS or to 3G network. There are sever-
al prerequisites that need to be met before using the 3GPP function successfully.
1. User should turn on the 2nd stream of the IP camera and set the resolution as QQVGA, FPS as 5, codec
as MPEG-4 and select a medium bit rate for Quality. In addition, after enabling the 2nd stream, you will
notice a drop in the frame rate for the primary stream. This is a normal behavior since the camera system
has to process two streams instead of just one.
2. User needs to enable DDNS function and obtain a valid Dynamic DNS (DDNS) address as detailed in ear-
lier sections of this manual.
3. Ensure that an active internet connection is available for both the IP camera and the intended mobile
phone.
4. Port forwarding on the network router to which your IP camera is connected must be configured prop-
erly in order to enable remote viewing on your IP camera.
Having taken above actions, enter the camera's RTSP streaming address into the address field of your mobile
web browser or streaming software in order to view the live image. For example, enter “rtsp://ipcamera-ip/
medias2” (the “ipcamera-ip” is the DDNS address that you’ve obtained in the installation process).
Note:
Compro does not guarantee the successful viewing of live video on every
3GPP-compatible cell phone. You may also need to consult with the mo-
bile network service provider about the usage and availability of 3GPP
format.