Compro Technology TN2200, User Manual

Page: 51 / 76

6-11 Event Setup Event Setup
Chapter 6: Configuration
event trigger or modify an existing one. Then under [Event Actions], check [Send SMS] and choose
[Finish]. Note that you must have enough credit at Clickatell in order to send SMS message.
Trigger Setup
You can create, modify, or delete event triggers and set the trigger mechanism to be by schedule, motion/au-
dio detection, or tampering/loitering detection (available types of event trigger depend on camera support).
To create a new event trigger, press [Create] and select an event trigger from the "Event Trigger" list.
When creating an event trigger by Schedule, you can set up scheduled time and period. When setting event
trigger by Motion Detection, you can select the trigger area defined in the "Motion Detection" setup. To cre-
ate an event based on tampering detection or loitering detection, select "Camera Tampering Detection" or
"Loitering Detection" from the "Event Trigger" list.
Figure 6-13. Creating events
After finishing event trigger setup, click [Next] to select event actions so your camera will take snapshots,
send e-mails, upload images to ftp, or etc.
Note:
If you like to create an event trigger based on motion detection, you
must configure a motion detection region first in "Motion Detection"
setup.
Motion Detection Setup
Motion detection function provides a selection of 3 regions for detection. You can directly click and drag on
the preview screen to set a detection region. Prior to that, please select the region (0, 1 or 2 ) and the sensitiv-
ity level (S1: Lowest, S2: Low, S3: Medium, S4: High, S5: Highest) from their drop down list. Press [Save] button
for the settings to take effect.