Compro Technology TN2200, User Manual

Page: 42 / 76

6-2 Camera Settings Video Settings
Compro TN2200 - User’s Manual
Video Settings
Here you can configure the settings for video stream.
Figure 6-2. Video Settings page
Video Mode
•
Turbo picture
- This mode will provide you with the best video quality, but max. frame rate will be limited
to 15.
•
Motion adaptive
- This mode will provide up to 30 FPS at maximum 640 by 480 resolution.
Stream Setting
You can change the setting of resolution, codec, frame rate, and quality for the video stream. If you need
to watch the live video on your mobile phone or PDA, please check the [Enable 2nd stream (include 3GPP)]
checkbox to enable the secondary video stream, and then the stream setting for the 2nd stream will be dis-
played. Check [3GPP Mode] box to enable the viewing of secondary stream on a 3GPP-capable cell phone.
Standard
If you have connected the camera’s video output to the video input of your TV, select analog television sys-
tem used in your region (NTSC or PAL). The NTSC system is mainly used in North America, South America, and
some Asian countries. The PAL system is mostly used in Europe and many other countries. Image won’t be
displayed properly if the wrong system is selected.
Reset Button
Composite Video Output
microSD card slot
Figure 6-3. Composite video output of this camera
Video Buffer
Here it allows you to adjust the video buffer size. If you experience occasional network congestion during live
viewing, using a small or large buffer setting, instead of the standard setting, may improve video smoothness.
But the larger the buffer size is, the higher the video latency will be.