Compro Technology TN2200, User Manual

Page: 52 / 76

6-12 Recording History Recording Setup
Compro TN2200 - User’s Manual
Sensitivity Level
Region Number
Figure 6-14. Motion detection setting
If you want to delete an existing motion detection region, please select the region number and click [Delete]
to delete it.
Note:
If you want to record video onto SD card whenever motion in the scene
is detected, you need to set at least a motion detection region before
setting up event-based recording under Recording Setup.
Audio Detection
Configure the sensitivity level in audio detection used by event trigger. Available options: low, medium, high.
The audio detection function on this IP camera works by measuring the volume level. Each different sensitivi-
ty stands for a particular threshold of triggering.
Sensitivity Threshold of Triggering
Low Approx. 65~70 dB
Medium Approx. 80~85 dB
High Approx. 100~105 dB
Recording Setup
In addition to the capability of storing event snapshots to local SD Card slot (Pre-installed 4GB card), this cam-
era also supports storage of video clips (audio may be included if enabled) to the local storage device. To con-
figure the recording function, go to the main setup page and click [Recording Setup]. Then follow the steps
below.
1. Recording Setting: Here it displays the status of your SD card among other options. Click [Next] to pro-
ceed.