Compro Technology TN2200, User Manual

Page: 34 / 76

4-8 Accessing via 3GPP Mobile Phone Accessing via M-JPEG Mode
Compro TN2200 Network Camera
Accessing via M-JPEG Mode
As long as your handset comes with a built-in web browser, you can use it to view the live video feed in M-JPEG
format (video only). Viewing of M-JPEG video stream is supported on popular smartphones, such as iPhone
or Android phone, as well as on a variety of mobile Internet devices such as Laptop, Tablet, PDA, Nettop, MID,
etc. with built-in web browser.
Platforms and supported web browsers are as follows:
• Windows: IE, Google Chrome, Safari, FireFox (non-IE browsers require VLC plug-in)
• Linux: FireFox
• Mobile Device: iPhone, iPod Touch, BlackBerry, Android, WM and major-brand mobile phones.
However, before you can successfully view your camera video from a remote location over the Internet, first
you need to configure port forwarding on the network router to which your IP camera is connected (see the
remote viewing section in the Troubleshooting chapter). Afterwards, follow the steps below to enable the
camera’s secondary video stream for viewing on mobile devices.
1. Use a PC to log on to the camera, and go to [Setup] > [Video Settings], and check the [Enable 2nd Stream
(include 3GPP)] box to enable the secondary video stream.
2. For the Stream-2, set the Codec as “Motion-JPEG.”
3. Launch the web browser on your iPhone, Android phone, or any other mobile Internet devices, and en-
ter "(IP-address)/mjpeg.html" into the address field of your phone’s web browser to watch live video on
your mobile device. You can also click on the link at the bottom of the Video Settings page to preview
the M-JPEG stream on your PC.
Figure 4-8. Enable 2nd stream