Club Car CARRYALL 252 2007, Maintenance And Service Manual

Page: 493 / 536

MOTOR (MODEL DA5-4006): ELECTRIC VEHICLES Motor
27
ClubCar
ClubCar
1
2
3
4
1. Position floor jack under hitch bracket or frame.
2. Lifting Position For Standard Turf 1 and Carryall 1
3. Lifting Position For Turf 2 and 252, Carryall 2 and 252, Carryall 2
Plus and XRT 900
4. Lifting Position For Turf 6 And Carryall 6
Figure 27-1 Lift Vehicle with Floor Jack Figure 27-2 Vehicle Supported on Jack Stands
5. Remove both rear wheels.
6. Remove the nut, cup washer, and bushing from the bottom side of the shock absorber. Compress the shock
absorber (pushing upwards) to move it out of the way
(Figure 27-3, Page 27-3) .
7. Remove the nuts and bolts mounting the rear leaf springs to the shackles.
8. To gain easier access to the motor, lower the transaxle as low as it will go. If more room is needed, remove the
jack from beneath the transaxle and allow the springs to rest on the floor
(Figure 27-3, Page 27-3) .
Figure 27-3 Lower Axle
2007-2009 Turf 252, Carryall 252 and XRT 900 Maintenance and Service Manual Page 27-3