Club Car CARRYALL 252 2007, Maintenance And Service Manual

Page: 496 / 536

27
Motor
MOTOR (MODEL DA5-4006): ELECTRIC
VEHICLES
11.2. Remove the two nuts securing the brush terminals (A1 and A2) to the end cap.
11.3. Remove the four bolts and the brush rigging from the end cap (Figure 27-8, Page 27-6) .
12. Inspect the terminal insulators. See Terminal Insulator Inspection on page 27-9.
13. Remove the bearing from the end cap.
13.1. Remove the retaining ring that secures the bearing in the end cap (Figure 27-9, Page 27-6) .
13.2. Use an arbor press to remove the bearing from the end cap.
14. Inspect the bearing for wear and damage. See Bearing Inspection on page 27-9.
Figure 27-8 Brush Rigging Removal Figure 27-9 Retaining Ring Removal
Page 27-6 2007-2009 Turf 252, Carryall 252 and XRT 900 Maintenance and Service Manual