Club Car CARRYALL 252 2007, Maintenance And Service Manual

Page: 449 / 536

IQ DISPLAY MODULE (IQDM) SERIES 2 AND
IQDM-P DIAGNOSTICS
Functions Menu
23
2. Turn the key switch to the OFF position, place the Forward/Reverse handle in the NEUTRAL position, and
lock the park brake.
3. Plug the handset into the vehicle.
3.1. Connect one end of the cable to the jack located on the bottom of the handset.
3.2. Connect the cable adaptor to the IQDM cable.
3.3. Remove the dust cap from the IQDM jack.
3.4. Align the keyed portion of the plug with the IQDM jack and connect the plug to the jack (Figure 23-1,
Page 23-1) .
4. Scroll to the functions menu and select.
5. Select settings .
6. Select get settings from controller .
7. Press + on the change value button to confirm the operation.
8. The handset will display an “executing...” message for the next few seconds while the controller settings are being
stored in the handset’s memory
(Figure 23-3, Page 23-15) .
9. When the handset is finished recording the speed controller settings, a confirmation message is displayed
(Figure 23-4, Page 23-15) .
10. With the controller settings stored in the memory of the handset, the handset can be used to transfer all of the
desired speed controller settings to any IQ Plus vehicle or group of IQ Plus vehicles. See Speed Controller
Cloning – Transferring Settings from the Handset to the Vehicle on page 23-16.
2
1
3
Executing...
2
3
All Controller Settings
Saved in Programmer.
OK (+)
1
Figure 23-3 Handset Executing
Figure 23-4 Confirmation Message
2007-2009 Turf 252, Carryall 252 and XRT 900 Maintenance and Service Manual Page 23-15