Menus And Functions
14
P2398PM | 2022-07
Apex Tool Group
3
EN
3.4
Run screen
The run screen displays the rundown data for the tightening sequence. The appearance of the run screen
differs depending on whether the mPro mode or the FastApps mode is selected.
For both modes, the following applies:
Green background: The result of a tightening sequence is OK.
Green-blue flashing: The overall result for all the tightening positions (batch) is OK.
Red background: The result of a tightening sequence is NOK.
Flashing red: The overall result of all the tightening sequences is NOK. This is the case if at least one
tightening position is NOK.
3.4.1
Run screen in the mPro mode
The linking group for the tightening sequence is selected in the mPro mode on the controller.
Fig. 3-2: Run screen in the mPro mode without
External Application / LG Selection
Fig. 3-3: Run screen in the mPro mode with Exter-
nal Application / LG Selection
Display of the Application/Linking group
In mPro mode, the current Application/Linking group is only displayed if the function
Selecting the Applica-
tion/Linking group
activated. Depending on the setting of the controller, the Application or Linking group is
selected.
Symbol
Description
Display of the currently selected Application or Linking group (mPro).
Up to 99 Applications/Linking groups can be programmed. The number on the icon in-
dicates which Linking group is selected.
To the right of the symbol, up to twelve characters of the name of the Application or
Linking group are displayed. If no name has been parameterized, "---" is displayed.
Display of the currently selected Application or Linking group. The parameters for this
Linking group are used for the tightening.
