Menus And Functions
16
P2398PM | 2022-07
Apex Tool Group
3
EN
Symbol
Description
Display of the angle shutoff. The value to the right of the symbol indicates the shut-
off angle.
Display if the tightening strategy is not programmed.
Display of the currently selected FastApp. The parameters for this FastApp are used
for the tightening.
Display of the rundown data
Symbol
Description
Batch display
Number of tightening positions for a FastApp.
If there is only one FastApp, then each result is evaluated.
If there is more than one FastApp, the overall result of all the tightening positions is
considered.
Example: 2/3
Current tightening position: 2
Total number of tightening positions: 3
Display of the torque for the current tightening.
If an arrow pointing up appears next to the symbol, the result is too high.
If an arrow pointing down appears next to the symbol, the result is too low.
Display of the angle for the current tightening.
If an arrow pointing up appears next to the symbol, the result is too high.
If an arrow pointing down appears next to the symbol, the result is too low.
Indicates that the node number or IP address of the tool is assigned twice.
Change the node number or IP address.
3.4.3
Selecting the FastApps
To change between the FastApps, press
or
.
Only Linking groups that have already been parameterized can be selected.
A new display appears with the following selection options:
Button
Description
Press the
button to select a new Linking group.
must be pressed to cancel the process and return to the run screen.
