Menus And Functions
40
P2398PM | 2022-07
Apex Tool Group
3
EN
3.9
WLAN communication
In this menu, information about the WLAN connection is to be found. To configure WLAN settings, use the
Cordless RF Configuration
software. See document
P2372JH
.
If the tool is programmed so that WLAN settings are assigned via DHCP, this will appear to the right near
the "-" symbol as long as no connection could be established.
Fig. 3-32: Menu Communications
Button
Description
WLAN connection is activated.
WLAN connection is deactivated.
All WLAN settings are hidden.
SSID display.
IP address display.
If the IP address is assigned twice, the symbol
is displayed in the run screen..
Then change the IP address.
Network mask display.
Gateway display.
MAC address display.
