Menus And Functions
Apex Tool Group
P2398PM | 2022-07
9
3
EN
3
3.1
General Functions
All paths are specified starting from the main menu.
To go from the runscreen to the main menu, press the
key.
3.1.1
Switching On The Tool
To switch on the tool, press the start trigger.
3.1.2
Switching Off Tool
There are several ways to switch off the tool.
Option 1:
Remove the battery.
Tool switches off after 20 seconds.
Option 2:
1.
Select
>
.
2.
Press the
button.
The
symbol is displayed on the LCD.
After five seconds, the tool switches off.
Option 3:
The tool will switch off if it is not used for a certain time,
see chapter 3.7.4 Setting the shut-off properties,
page 28
.
3.1.3
Selecting a button
When talking about pressing a button in this manual, this means the foll owing:
1.
Use the arrow buttons to navigate to the desired button (outlined in blue).
2.
Press the
button.
3.1.4
Changing parameters
1.
Press the
button.
2.
Change the number using the arrow buttons.
3.
Confirm with the
button.
3.1.5
Change between FastApps and mPro mode
1.
Select
>
.
2.
Press the
button to switch between modes.
FastApps mode is activated.
mPro mode is activated. A connection to the controller is necessary, see document P2402KA.
