Troubleshooting
66
P2398PM | 2022-07
Apex Tool Group
5
EN
Problem
Possible cause
Measure
Establishing a Bluetooth
connection fails.
Note that the tool can only connect to an
mPro200GC series controller.
Retry to establish a Bluetooth connection.
Restart the tool and try to establish the
Bluetooth connection again.
Restart the controller and try to establish
the Bluetooth connection again.
The node number is as-
signed twice.
Make sure that each node number is as-
signed only once. Note that only seven
nodes are possible.
The wrong IP address is
used for the tool on the
controller.
Make sure that the tool has been installed
on the controller with the correct IP ad-
dress.
