Proprietary Information: Not for use or disclosure except by written agreement with Clearfield.
130
FieldSmart
®
Fiber Active Cabinet (FAC) 3200
Installation Manual
_________________________________________________________
Step 1:
Step 2:
Step 3:
Step 4:
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Changing the battery profile
You can verify or change the battery profile from the PRESET menu. Select the appropriate profile (VRLA or LMP) for the
type of battery used in the cabinet. For a list of the default profile settings, see
Valere Rectifier Setpoints
.
To select a battery profile
From the ADMIN menu, choose
>PRESET
.
Press the MENU button once. The controller should display LMP.
Press the UP button until the appropriate battery profile (LMP, NiCAD, or VRLA) displays.
Once the appropriate battery profile is selected, press MENU for 5 seconds until the menu jumps back to
CHOOSE:>CONFIG
.
Press the UP button once to display
CHOOSE:>EXIT
.
Press the MENU button to return to the basic menu.
Changing rectifier settings
You can verify or change the rectifier settings from the SETPOINT submenu.
To modify rectifier settings
From the Administrator menu, choose
>SETPOINT
.
Press the UP button to toggle through the features on the SETPOINT submenu. Each feature can be enabled
or disabled by pressing
MENU
. On each feature with adjustable voltage or amperage, you can adjust the value
by pressing MENU, then adjusting the value with the UP/DOWN buttons.
Modify the settings per your application requirements.
Press the UP button until
>EXIT SETPOINT
displays. Press the MENU button to exit.
