Proprietary Information: Not for use or disclosure except by written agreement with Clearfield.
120
FieldSmart
®
Fiber Active Cabinet (FAC) 3200
Installation Manual
_________________________________________________________
Step 1:
Step 2:
a.
Insert the new rectifier module into the vacated slot.
b.
Push firmly on the module to seat it in the slot.
c.
Push the ejector lever closed to secure the module in place.
Repeat Steps 1 and 2 to replace additional rectifier modules.
Step 3:
As each rectifier module is installed, the shelf controller automatically identifies the new module and configures the system.
After all rectifier modules have been installed, the controller displays
System OK
.
If a shelf controller fails, the system remains at the last known settings until a new controller is installed.
To replace a Valere controller module
Remove the installed controller module as follows:
a.
Grasp the top and bottom edges of the display face plate, then gently pull the face plate down and forward to
disconnect it from the controller module. Allow the face plate to dangle.
b.
Loosen the set screw and slide the controller module halfway out of the slot.
c.
Disconnect the face plate's display cable from the controller module and set the face plate aside.
d.
Disconnect the temperature probe, alarm, and expansion cables from the controller module.
e.
Pull the controller module completely out of the shelf.
Install a new controller module as follows:
a.
Insert the new controller module halfway into the slot.
b.
Reconnect the alarm, temperature probe, and expansion cables to the controller module.
c.
Reconnect the face plate's display cable to the controller. Allow the face plate to dangle.
d.
Push firmly on the module to seat it in the slot, then tighten the set screw.
e.
Re-attach the face plate to the controller module.
When the controller displays
System OK
, it has completed its initialization and is ready to operate on default settings at the
Basic Menu level.
Note:
For detailed instructions on controller functionality, including how to program the controller module, see the Valere
Compact DC Power System Installation and Maintenance manual.
