86
SMARTFLOW II
When the
RESET
button is pressed it will immediately
display “
CLEAr
” in the Data display window as a
warning that it is about to clear counters. If the
RESET
button is released while displaying “
CLEAr
: then the
counters remain unchanged. If the
RESET
button is
pressed for 1 second or more then the
“
CLEAr
”
message
disappears and is replaced with “0” to indicate the
counters were cleared.
When fine tuning Flow Cal, the
RESET
button is pressed
to immediately clear a separate (independent) Volume
counter only used for fine tuning Flow Cal ("
CLEAr
”
is
not displayed).
Pressing
RESET
while in the PcOff will have no effect
and will not clear any counters. Instead the SmartFlow II
must be in
OFF
mode using the console’s Spray toggle
switch. (See Maintenance Alert section for additional
use of
RESET
button.)
Push Buttons
The SmartFlow II has four push buttons.
Their functions are described below:
1. Reset Button
When Area and Volume 1 (only) are selected then the
RESET
button will clear 4 counters (Area 1, volume
1, Distance and Time) at the same time. When in the
OFF mode, and in the Distance, Area, Volume or Time
rotary position then pressing the
RESET
button for 1
second will clear Time, Distance, Area 1 and Volume 1 (4
counters). While in the Distance or Time position it will
not display “
CLEAr
” or clear any counters unless the
counter pair 1 is selected in Area or Volume.
The Area-Volume pairs 2 or 3 are cleared independently.
While in Area of Volume mode, select the desired pair
to clear (2 or 3) and with the Spray toggle in
OFF
mode
press the
RESET
button for 1 second. Since the Area
and Volume counters are paired, clearing a selected
Area counter will also clear the corresponding Volume
counter (and vice versa).
RESET
CONTROL PANEL FUNCTIONS