107
SMARTFLOW II
Special Calibration Modes (Cont.)
5. Fill Tank Size
Selecting Volume position displays "SIZE" in the
Application Rate display allows the user to enter
a FILL TANK SIZE which can be toggled to
OFF
for 0.1 to 6,553.5 Gallons or Liters.
5a.
PPR (Pulses Per Revolution)
This feature is under
the "Volume 1,2,3" selection. PPR defines the number
of pulses from the spray head for the current spray
head design. This value must be set to "2" for proper
speed to be displayed.
While still in the Special Calibration
mode, if the dial
is turned to "Volume 1,2,3" position, this will allow a
change to the
PPr
(Programmed Number of Pulses per
Revolution – shown in the Application Rate window).
For current spray head configurations this number must
remain 2 for accurate rpm feedback and speed control,
(displayed in the Data Display window).
SPECIAL CALIBRATION MODES
SIZE
Tank Fill Size
SET PT
Tank Set Point
Snoo2
Max Snooze Count
ALERT
Maintenance Alert Time
PPR
Pulses Per Revolution Must Remain (2)
SH Hi
Spray Head RPM (High Limit) TYP. 30,000
SH Lo
Spray Head RPM (Low Limit)
tARg
Target Spray Head RPM (Speed) TYP. 28,000
UNIT
Units
ID
Vehicle ID
WJde
Width
C-SPD
Control speed