127
SMARTFLOW II
Messages and Warnings
(Cont.)
DISPLAY
CONDITION
SEEPE
In App Rate display to indicate Special Cal Tank ‘Set Point’ is selected.
SPEC
In App Rate display to indicate
SPECIAL CAL
mode is selected.
S1 2E
In App Rate display to indicate Special Cal Tank ‘Size’ is selected.
StorE
Has stored Default Cal Factors to non-volatile memory.
Unit
In App Rate display to indicate Special Cal ‘Units’ is selected.
00 idE
In App Rate display to indicate Special Cal ‘Width’ is selected.
ALErt
In AppRate display to warn that there is less than 1 minute of Maintenance
Alert Time remains before sprayer is shutdown.
ChEcHSLEE
In AppRate display to indicate that sprayer has been shut down and operator
should check or replace sleeve.
SH No
In AppRate display No RPM signal from spray head motor. If spinning, check
connections.
SH Lo
In AppRate display RPM is below low limit, but
SPRAY
switch is on
Continuous
or
Variable mode
.
TROUBLESHOOTING