98
SMARTFLOW II
Calibration Factors (Cont.)
7. Max Speed
MAX SPEED
displays the “Maximum Speed” which can
be adjusted from “Off” to 0.1 to 45.0 mph or kph. If
used, the user must ensure that
MAX SPEED
is greater
than Min Speed (if used) or else the sprayer will never
turn on.
MAX SPEED
is used to stop the sprayer (and Distance,
Area and Time counting) when the ground speed ex-
ceeds this limit (in the
VARIABLE
mode only).
1. To set the
MAX SPEED
factor: Place the
SmartFlow II in Calibration mode by placing
the rotary dial to
TARGET RATE
and hold the
CAL
and
INC
buttons together until the console reads
SET and the red Warning LED light is flashing.
2. Move the rotary dial to
MAX SPEED
position. ‘Hi’
is displayed in the in the Data display window
and the current Minimum Speed is displayed
in the Application Rate display window.
3. Use the
INC/DEC
buttons to increase or decrease
the speed.
4. Rotate the rotary dial to
TARGET RATE
, press and
hold the CAL button for 3 seconds to save the
change and exit Calibration mode.
MAX
SEED
CALIBRATION