116
SMARTFLOW II
Clearing Counters
When
Area
and
Volume 1
(only) are selected the
RESET
key will clear four counters (Area 1, Volume 1, Distance
and Time) at the same time.
When in the
OFF
mode, and in the Distance, Area,
Volume or Time rotary position pressing the RESET
key for 1 second will clear Time, Distance, Area 1 and
Volume 1 (four counters).
While in the Distance or time mode it will not display or
clear any counters unless the counter pair 1 is selected
in Area or Volume. The Area-Volume pairs 2 or 3 are
cleared independently.
While in Area or Volume mode, select the desired
pair to clear (2 or 3) and with the Spray toggle in
OFF
mode press the
RESET
key for 1 second. Since the Area
and Volume counters are paired, clearing a selected
Area counter will also clear the corresponding Volume
counter (and vice versa).
When the
RESET
key is pressed it will immediately
display in the Data display as a warning that it is
about to clear counters. If the
RESET
key is released
while displaying then the counters remain unchanged.
If the
RESET
key is pressed for 1 second or more then
the message disappears and is replaced with
“0” to indicate the counters were cleared.
OPERATION