Cisco MGX 8850 Command Reference Manual Download Page 46

Page: 46 / 786

1-16

Cisco MGX 8850 Routing Switch Command Reference

Release 2.0, Part Number 78-10467-04 Rev C0, October 2001

Chapter 1

Command Line Interface Overview

Copy

Use cp to copy a file to a new file on the disk on the PXM45-HD. This command is the same as the copy
command.

Cards on Which This Command Runs

PXM45

Syntax

cp <source file name> <destination file name>

Syntax Description

Related Commands

cd, ls, rm, pwd, rename

Attributes

Example

Create a new firmware file without the image’s suffix by copying the file named pxm_1.0.00Ef.fw to
pxm_1.0.00.fw.

MGX8850.8.PXM.a > cp pxm_1.0.00Ef.fw pxm_1.0.00.fw

source file name

The name of the file you intend to copy.

destination file name

The name of the new file resulting from cp or the name of the existing file that
is over-written as a result of cp.

Log: log

State: active, standby, init

Privilege: GROUP1

Summary of Contents for MGX 8850



















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MGX 8850

Reviews:

Related manuals for MGX 8850

Brands by name

Popular brands

Cisco MGX 8850, Command Reference Manual

Search results

Summary of Contents for MGX 8850

Reviews:

Related manuals for MGX 8850

Brands by name

Popular brands