manualshive.com logo in svg

Cisco MGX 8850, Command Reference Manual

The Cisco MGX 8850 is a powerful networking device designed for high-performance and scalable network deployments. To maximize its full potential, users can easily access the Command Reference Manual from our website, enabling them to download this comprehensive manual for free.

Share
Download
background image

3-60

Cisco MGX 8850 Routing Switch Command Reference

Release 2.0, Part Number 78-10467-04 Rev C0, October 2001

Chapter 3

Equipment and Resource Provisioning

dspcdsct

Example SCT 2

This example shows all parameters for SCT 2. Each display consists of one member of the SCT 
parameter group. The screen examples show the SCT ID that you have displayed (the command itself 
does not require the SCT ID because it is card-level.

Display the bandwidth parameters for SCT 2.

MGX8850.1.AXSM.a > dspcdsct bw

+-----------------------------------------------------------------------------+

Service Class Template [2] : Bw and Policing Parameters

+-----------------------------------------------------------------------------+

| SERV-TYPE |   PCR    |   SCR    |   MCR    |   MBS    |   CDVT   |   ICR    |

+-----------------------------------------------------------------------------+

| VSI-SIG   | 00001000 | 01000000 | 00000000 | 00000050 | 00250000 | 00000000 |

| CBR.1     | 00001000 | 00000000 | 00000000 | 00000001 | 00250000 | 00000000 |

| VBR-RT.1  | 00001000 | 01000000 | 00000000 | 00000050 | 00250000 | 00000000 |

| VBR-RT.2  | 00001000 | 01000000 | 00000000 | 00000050 | 00250000 | 00000000 |

| VBR-RT.3  | 00001000 | 01000000 | 00000000 | 00000050 | 00250000 | 00000000 |

| VBR-nRT.1 | 00001000 | 01000000 | 00000000 | 00000050 | 00250000 | 00000000 |

| VBR-nRT.2 | 00001000 | 01000000 | 00000000 | 00000050 | 00250000 | 00000000 |

| VBR-nRT.3 | 00001000 | 01000000 | 00000000 | 00000050 | 00250000 | 00000000 |

| UBR.1     | 00000010 | 00000000 | 00000000 | 00000001 | 00250000 | 00000000 |

| UBR.2     | 00000010 | 00000000 | 00000000 | 00000001 | 00250000 | 00000000 |

| ABR       | 00000010 | 00000000 | 01000000 | 00000001 | 00250000 | 00000000 |

| CBR.2     | 00001000 | 00000000 | 00000000 | 00000001 | 00250000 | 00000000 |

| CBR.3     | 00001000 | 00000000 | 00000000 | 00000001 | 00250000 | 00000000 |

+-----------------------------------------------------------------------------+

Display the policing and CAC parameters (parameter “gen”) for SCT 2. To confirm that the current 
card-level SCT is SCT 2, execute dspcd. 

MGX8850.1.AXSM.a > dspcdsct gen

+-------------------------------------------------------------------------------------------------+

Service Class Template [2] : General Parameters

+-------------------------------------------------------------------------------------------------+

| SERV-TYPE | COSB_NUM | CAC_TYPE | UPC_ENB  | CLP-SELEC |    GCRA-1    |    GCRA-2    | CI-CNTRL |

+-------------------------------------------------------------------------------------------------+

| VSI-SIG   | 00000016 |    B-CAC |GCRA 1 & 2| 000000002 |      DISCARD |      DISCARD | DISABLED |

| CBR.1     | 00000003 |    B-CAC |GCRA1-ENB | 000000003 |      DISCARD |      DISCARD | DISABLED |

| VBR-RT.1  | 00000004 |    B-CAC |GCRA 1 & 2| 000000002 |      DISCARD |      DISCARD | DISABLED |

| VBR-RT.2  | 00000004 |    B-CAC |GCRA 1 & 2| 000000001 |      DISCARD |      DISCARD | DISABLED |

| VBR-RT.3  | 00000004 |    B-CAC |GCRA 1 & 2| 000000001 |      DISCARD |      SET-CLP | DISABLED |

| VBR-nRT.1 | 00000005 |    B-CAC |GCRA 1 & 2| 000000002 |      DISCARD |      DISCARD | DISABLED |

| VBR-nRT.2 | 00000005 |    B-CAC |GCRA 1 & 2| 000000001 |      DISCARD |      DISCARD | DISABLED |

| VBR-nRT.3 | 00000005 |    B-CAC |GCRA 1 & 2| 000000001 |      DISCARD |      SET-CLP | DISABLED |

| UBR.1     | 00000006 |  LCN_CAC |GCRA1-ENB | 000000003 |      DISCARD |      DISCARD | DISABLED |

| UBR.2     | 00000006 |  LCN_CAC |GCRA1-ENB | 000000003 | DSCD/SET-CLP |      DISCARD | DISABLED |

| ABR       | 00000001 |    B-CAC |GCRA1-ENB | 000000003 |      DISCARD |      DISCARD | ENABLED  |

| CBR.2     | 00000003 |    B-CAC |GCRA 1 & 2| 000000001 |      DISCARD |      DISCARD | DISABLED |

| CBR.3     | 00000003 |    B-CAC |GCRA 1 & 2| 000000001 |      DISCARD |      SET-CLP | DISABLED |

+-------------------------------------------------------------------------------------------------+

Summary of Contents for MGX 8850



















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MGX 8850

D-Link DSL-2750U Setup preview
DSL-2750U
Brand: D-Link Pages: 14
D-Link DVG-7022S Quick Installation Manual preview
DVG-7022S
Brand: D-Link Pages: 7
D-Link DIR-878 Quick Installation Manual preview
DIR-878
Brand: D-Link Pages: 41
Barracuda Networks Network Quick Start Manual preview
Network
Brand: Barracuda Networks Pages: 2
PaloAlto Networks ION 1200 Series Hardware Reference Manual preview
ION 1200 Series
Brand: PaloAlto Networks Pages: 90
SyChip WLAN6065SD User Manual preview
WLAN6065SD
Brand: SyChip Pages: 24
Xenya XS26GS User Manual preview
XS26GS
Brand: Xenya Pages: 189
B+B SmartWorx spectre lte User Manual preview
spectre lte
Brand: B+B SmartWorx Pages: 52
Abocom WR5502 User Manual preview
WR5502
Brand: Abocom Pages: 63
Lantech IMR-3003 User Manual preview
IMR-3003
Brand: Lantech Pages: 40
NETGEAR RH328 Reference Manual preview
RH328
Brand: NETGEAR Pages: 142
Intel IXP45X Developer'S Manual preview
IXP45X
Brand: Intel Pages: 958
BinTec BIANCA/BRI Getting Started preview
BIANCA/BRI
Brand: BinTec Pages: 34
Patton electronics ipRocketLink IAD 3086 Quick Start Manual preview
ipRocketLink IAD 3086
Brand: Patton electronics Pages: 12
KYLAND Technology KIEN1009 Hardware Installation Manual preview
KIEN1009
Brand: KYLAND Technology Pages: 24
DHD Power Cruiser 52/XR Manual preview
52/XR
Brand: DHD Power Cruiser Pages: 60
Avigilon NVR5-STD-10GBE Installation Manual preview
NVR5-STD-10GBE
Brand: Avigilon Pages: 12
Paradyne Hotwire 5620 RTU Installation Instructions Manual preview
Hotwire 5620 RTU
Brand: Paradyne Pages: 20

Brands by name

Popular brands

Load more brands