7-26
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 7
SPVC and SVC Commands
cnfcon
- rscr
Keyword that specifies the Sustained Cell Rate (SCR) from a remote endpoint to a
local endpoint (7–5651328 cells per second). Sustained Cell Rate is the maximum cell
rate that a connection can sustain for long periods.
- lmbs
Keyword that specifies the Maximum Burst Rate (MBS) from a local endpoint to a
remote endpoint (1–5000000 cells). Maximum Burst Size is the maximum number of
cells that can burst at the PCR and still be compliant.
- rmbs
Keyword that specifies the Maximum Burst Rate (MBS) from a remote endpoint to a
local endpoint (1–5000000 cells). Maximum Burst Size is the maximum number of
cells that can burst at the PCR and still be compliant.
- cdvt
Keyword that specifies the Cell Delay Variation Tolerance (CDVT) from a local
endpoint to a remote endpoint (1–5000000 microseconds). Cell Delay Variation
Tolerance controls the time scale over which the PCR is policed. Note that no remote
CDVT is necessary.
- rcdvt
Keyword that specifies the Cell Delay Variation Tolerance (CDVT) from a remote
endpoint to a local endpoint (1–5000000 microseconds). Cell Delay Variation
Tolerance controls the time scale over which the PCR is policed.
- lcdv
Keyword that specifies the Cell Delay Variation (CDV) from a local endpoint to a
remote endpoint (1–16777215 microseconds). Cell Delay Variation is the peak to
peak cell delay variation expressed in microseconds.
- rcdv
Keyword that specifies the Cell Delay Variation (CDV) from a remote endpoint to a
local endpoint (1–16777215 microseconds). Cell Delay Variation is the peak to peak
cell delay variation expressed in microseconds.
- cc
(Optional) Keyword that sets the OAM CC: Enter 1 to enable or 0 to disable. The
default is 0.
- stat
(Optional) Keyword that sets the statistics collection: Enter 1 to enable or 0 to disable.
The default is 0.
The Cisco WAN Manager tool collects statistics for a connection if you enable it here.
Statistics collection is disabled for all connections by default. Statistics collection has
an impact (which may not be significant) on the real-time response, especially for
SVCs (which can be affected even though you do not add SVCs). Therefore, you
should enable statistics collection for only that subset of connections that really
warrants such a feature.
- frame
Keyword that sets frame discard: Enter a 1 to enable or a 0 to disable. The default is 0.
