![background image](http://html.mh-extra.com/html/cisco/mgx-8850/mgx-8850_command-reference-manual_66000360.webp)
5-66
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 5
PNNI Commands
dsppnni-intf
dsppnni-intf
Display PNNI Interface
—
display the PNNI aggregation token and AW for a port.
This command displays the following information for a PNNI port:
•
Aggregation token. The current release does not support the aggregation token.
•
Administrative weight (AW).
•
The logical port identifier assigned to the physical port identifier.
Cards on Which This Command Runs
PXM45
Syntax
dsppnni-intf <portid>
Syntax Description
Display Contents
The following parameters are displayed for each node. The right column shows the label for each value
that appears in the dsppnni-intf command. The left column maps each value to the corresponding
keyword in the cnfpnni-intf command and explains the argument function.
portid
The portid is the PNNI physical port. The format is
[shelf.]slot[:subslot].port[:subport]. See also
PNNI Format, page 5-5
.
Default: none
Physical port Id
Display the physical PNNI identifier on the interface. The portid variable is
entered and displayed as a numeric string formatted as
[shelf.]slot[:subslot].port[:subport]. For more details including the ranges, see
PNNI Format
.
Logical port Id
Display the logical PNNI port identifier. The -portId parameter displays the
logical PNNI port identifier on the interface.
Range: 1–2147483648.
Aggr token
Display the 32 bit number used for link aggregation purpose.
AW-NRTVBR
Display the AW for non-real-time variable bit rate (nrtvbr) connections on this
interface. nrtvbr accounts for the bursty traffic that is caused by some
non-real-time applications. This category is characterized in terms of a PCR,
SCR, and MBS.
Range: 0–4194304