2-53
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 2
Shelf Management Commands
dspclksrcs
source as unlockable and proceeds to use the next clock in the hierarchy (of primary, secondary, internal
oscillator) as the current clock source. The exception to this final validation scenario occurs if the current
clock source is the internal oscillator in either the free running mode or the hold-over mode: in this case,
the software omits this final validation attempt because no other clocks sources within a clock hierarchy
are available.
Revertive Behavior
For information on revertive behavior, see the cnfclksrc description.
Cards on Which This Command Runs
PXM45
Syntax
dspclksrcs
Related Commands
cnfclksrc, delclksrc, dspclkalms
Attributes
Example
Display the current clock sources. The display shows that both the primary and secondary clocks are
good. They are sourced at lines 2 and 3 of the AXSM in slot 6. Also, the active clock is provided by the
the primary source. The primary and secondary clock reason is “okay” in each case.
pinnacle.7.PXM.a> dspclksrcs
Primary clock type: generic
Primary clock source: 6.2
Primary clock status: good
Primary clock reason:
okay
Secondary clock type: generic
Secondary clock source: 6.3
Secondary clock status: good
Secondary clock reason:
okay
Active clock: primary
source switchover mode: non-revertive
Log: no log
State: active, standby
Privilege: ANYUSER
