![background image](http://html.mh-extra.com/html/cisco/dpa-7610/dpa-7610_administration-manual_64877096.webp)
Chapter 5
Getting Started with the DPA 7630/7610
Configuring Network Settings
5-4
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
78-11069-03
Figure 5-1
DPA 7630/7610 Main Menu
Configuring Network Settings
You must configure the network settings on the DPA 7630/7610 to connect it to
the IP network. After configuring any network settings, you must restart the
DPA 7630/7610. See the
“Restarting the DPA 7630/7610” section on page 7-1
.
Setting the Host Name
The host name is the device name sent to the Cisco CallManager server (with the
port number appended to it) when the DPA 7630/7610 registers its ports with
Cisco CallManager. It appears in the MAC address field. See the
“Adding the
DPA 7630/7610 to Cisco CallManager” section on page 4-3
for details.
Typically, to ensure that the DPA 7630/7610 registers properly with
Cisco CallManager, you should not change the host name. However, you might
need to change it in some special situations.
45807