3-7
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
78-11069-03
Chapter 3
Installing the DPA 7630/7610
Installing the DPA 7630/7610
Putting the DPA 7630/7610 in a Rack
After the brackets are secured to the chassis, you can rack-mount it (
Figure 3-3
).
Figure 3-3
Mounting the DPA 7630/7610 in a Rack
Step 1
Lift the DPA 7630/7610 and align the mounting holes in the L brackets with the
mounting holes in the rack.
Step 2
Secure the chassis by inserting the mounting screws through the holes in the
L brackets and into the threaded holes in the mounting posts.
Setting the DPA 7630/7610 on a Shelf or Table
Before setting the DPA 7630/7610 on a desktop, shelf, or other flat, secure
surface, adhere the rubber feet included with the DPA 7630/7610. To attach them
to the chassis, peel the rubber feet from the adhesive strip and place them
adhesive-side down onto the round, recessed areas on the bottom of the chassis.
Place the DPA 7630/7610 right-side up on a flat, smooth, secure surface.
POWER
LINE C
LINE B
LINE A
45779
The second bracket attaches to the rack at the other side of the chassis.
The brackets can also be installed with the front panel forward.
19-inch rack
