Chapter 6
Configuring Telephony Settings
Configuring Cisco CallManager Settings
6-10
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
78-11069-03
To assign a TFTP server, perform these steps:
Step 1
From the main menu, choose Configure.
Step 2
Choose CallManager.
Step 3
Choose TFTP server address.
Step 4
Enter the IP address or domain name of the TFTP server.
To enter multiple TFTP servers, separate them using a comma (,) or semicolon (;).
You can enter a maximum of five (5) TFTP servers.
Step 5
Restart the DPA 7630/7610.
Entering MWI for Cisco CallManager
On Cisco CallManager, you must set the dialing sequence used to enable and
disable the MWI on phones connected to Cisco CallManager. These settings must
match those entered in Cisco CallManager (see the
“Configuring the Message
Waiting Light” section on page 4-13
).
To enter the MWI settings, perform these steps:
Step 1
From the main menu, choose Configure.
Step 2
Choose CallManager.
Step 3
Choose the appropriate settings:
•
CallManager MWI ON directory number
•
CallManager MWI OFF directory number
Step 4
Enter the appropriate values obtained from the Cisco CallManager system.
Step 5
Restart the DPA 7630/7610.
