4-13
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
78-11069-03
Chapter 4
Preparing the Cisco CallManager and Octel Systems
Configuring Cisco CallManager
Configuring the Message Waiting Light
In Cisco CallManager, you must set the option to enable the message waiting light
on Cisco IP Phones. After you configure these settings, you must record the
values and enter them on the DPA 7630/7610 (see the
“Entering MWI for
Cisco CallManager” section on page 6-10
).
Refer to the section appropriate for the version of Cisco CallManager that you are
using in your network:
•
Configuring Message Waiting Indicators for Cisco CallManager 3.1,
page 4-13
•
Configuring Message Waiting Indicators Using Cisco CallManager 3.2,
page 4-14
Configuring Message Waiting Indicators for Cisco CallManager 3.1
You must configure these settings for each Cisco CallManager system in a
cluster, and you must stop and restart Cisco CallManager after making these
changes.
Step 1
From Cisco CallManager, choose Service > Service Parameters.
Step 2
From the Server drop-down list box, choose a server.
Step 3
From the Services list, choose Cisco CallManager.
Table 4-7
End User Phones Configuration Settings
Field
Description
Cisco CallManager 3.1
Forward Busy
Set to Pilot Directory Number
Forward No Answer
Set to Pilot Directory Number
Cisco CallManager 3.2
Voice Mail Profile
Choose the profile for this directory number.
Forward Busy
Check the Voice Mail option.
Forward No Answer
Check the Voice Mail option.
